When setting up the cricket ground equipment the first few basic items required are the boundary and the sight screen. The boundary has 2 primary uses within cricket. Firstly the boundary is simply used to mark out the edge of the playing field, marking out the area of play. Secondly the boundary is used for the scoring of runs within the game of cricket, where a four is when the ball reaches the boundary, but a six is when the ball is hit clean over it. A sight screen is another very important piece of cricket ground equipment that must be set up before playing a game of cricket. The purpose of a cricket sight screen in crickets is to aid the visibility of the ball. The sight screens are placed at each end of the cricket ground opposite to the wickets, the colour of the sight screens makes seeing the cricket ball easier for the batsman. The sight screen also helps block out any distractions through light or otherwise that the bowler or batsman may face, which in turn help improve player performance.

The third piece of cricket ground equipment that is needed before starting to play cricket is the stumps and bails. The stumps are 3 wooden polls that are placed vertically in the ground directly behind the batter at each end of the pitch. Stumps are no more than 28 inches tall and have a spike at the end to be easily put into the ground. The bails are two small pieces of wood that sit on top of the stumps to link them together. In a game of cricket the batter is out when the stumps are broken apart, with one or both of the bail’s leaving the stumps. This can happen through the ball hitting the wicket, the batter hitting the wicket with their bat or if a fielder hits the wicket with the hand the ball is in.

The final two pieces of cricket ground equipment needed to begin your game of cricket is a ball and a bat. A regulation cricket ball has a cork base, and is wrapped in twine which is covered with leather. Cricket balls are also normally red or white, and very hard making them a potentially dangerous object when playing a game. A regulation cricket bat is often made from either Kashmir or English willow. A cricket bat has a long handle and on smooth face, with the other face in a triangular shape. Regulations also state that bats can be no longer than 38 inches and no wider than 4.25 inches.

With the amount of cricket ground equipment needed it is very important not only to purchase high quality items that will last but also affordable to save on major costs. Should you have any questions about the equipment available always to be sure to ask a customer representative at your cricket ground equipment supplier and they will always be willing to help.

Leg spin bowling is a style of spin bowling in cricket. It is a delivery bowled by a right hand bowler and will, after landing on the cricket pitch, spin from the leg-side to the off-side.

The grip. The leg spin grip for the normal stock ball delivery is a very simple one. The ball must be held firmly in the hand but not too tight and deep in the palm – otherwise the ball will get stuck during delivery and the bowler will generate less spin. The seam of the ball must run underneath all the fingers (opposite of a fast bowler grip). The index and middle finger must be up and on top of the ball and seam and the ring and little finger must face down. The side of the ball must rest against the ring finge

The action. The action for the spin bowler is as important as the grip and release. The action can be side on or a bit more open chested but the important thing is that the left arm (for a right handed bowler) arm drives the actions forward. The left arm must throw your body forward by pointing it in front of the bowler and pulling it back strongly during the delivery stride.

The pivot. To pivot the bowler must both turn the body and push up on the toes of his or her landing foot. This does two things: It helps the bowler swivel the body against the grip on the foot – creating more turn when the ball pitch – and it also helps in the bowler releasing the ball from higher – resulting in more bounce.

The release. The whole hand must work together as one when released. Do not move some fingers independently of others. The hand and wrist must be one. The ball must be released with the seam facing upwards and aiming towards first slip.

During the release the wrist must also be cocked at the start. In other words, the arm and hand must not run in a straight line. Watch some clips of great leg spin bowlers as they start off with their run-up, the bowling wrist is always cocked. So another top cricket tip is that the bowling wrist for the leg-spinner must always be cocked as it helps to impart more spin.

A really good cricket tip you can give a young spin bowler is to tell him or her that as much of the spin is generated in the action as in the release. Another great cricket tip is that bounce is as important for a spin bowler as turn – this is why pivoting on the landing foot is so crucial.